Universeal Slate Seal

Hard-wearing Surface Coating

Universeal Slate Seal is a hard wearing surface sealer which leaves the slate looking vibrant and shiny. The colour structure of the slate is intensified; the surface develops a “wet glossy look” It offers high quality stain protection as well as beautifying the natural colours of the slate. This treatment prevents water and dirt from penetrating into the surface, making it easier to clean and maintain.

Special Features

• Hard Wearing Gloss Finish
• Intensifies Natural Colours
• High Quality Stain Protection
• Indoor & Outdoor Use

• 1 Litre bottles with childproof cap 

Coverage:

Up to 15m2 per litre. Coverage will vary depending on surface porosity.

Directions for use:

The surface to be treated must be completely dry and clean. Apply Universeal Slate Seal evenly with a clean roller or brush. In the case of highly absorbent surfaces, it may be necessary to apply a second coat. Application Temperature: the temperature of the surface should be between 5°C and 25°C. Switch off under floor heating prior to application. *Drying Time: Light foot traffic after approx 45-60 minutes, completely dry / cured after 48 hours. Avoid cleaning and spillages for 48 hours after application.